Schneider Electric
View referenceModicon M221 PLC, 16 I/O, Ethernet
TM221CE16R
Manufacturing
Rosback / F.P. RosbackAsk about this referenceBack to brands and parts
Rosback 203R bookbinding system with 250R three-knife trimmer
Approximate match for 203-250R interpreted as a Rosback 203R + 250R system. Sources identify a bookletmaking line with a 203R stitcher, 706R collator and 250R three-knife trimmer.
Manufacturing · MACHINERY
203-250R
DO YOU NEED THIS REFERENCE?
We confirm the exact reference, price, availability and lead time with you before purchasing.
Previously managed reference · Not available inventory. We confirm availability, price and lead time for each request.
Technical specifications
| Brand | Rosback / F.P. Rosback |
|---|---|
| Category | MACHINERY |
| Industry | Manufacturing |
| Main equipment | Rosback 203R stitcher and Rosback 250R three-knife trimmer |
| Maximum booklet size on stitcher | 12-1/2 in x 15 in (318 mm x 381 mm) |
| Minimum booklet size on stitcher | 3 in x 5 in (76 mm x 127 mm) |
| Maximum stitching thickness | 3/16 in (4.75 mm) |
| Stitcher production speed | 1,800 to 5,000 cycles/h; up to 4,300 booklets/h |
| Trimmer speed | 2,000 to 5,000 cycles/h |
| Maximum trim size | 11-1/2 in x 15 in (292 mm x 381 mm) |
| Minimum trim size | 4 in x 7 in (102 mm x 178 mm) |
| Maximum book thickness on trimmer | 3/8 in (9.5 mm) |
| Maximum untrimmed booklet size | 12-1/2 in x 16-1/2 in (318 mm x 419 mm) |
| Trimmer dimensions | 48 in height x 126 in length x 36 in width (122 cm x 320 cm x 91 cm) |
| Trimmer net weight | 2,300 lb |
| Stated electrical supply | 115 V / 220 V, 50/60 Hz, 1 phase |
Summary datasheet - Rosback 203R + 250R
The number 203-250R was not confirmed as a single manufacturer part reference in the sources reviewed. The closest match is a Rosback bookbinding set made up of a 203R stitcher and a 250R three-knife trimmer, sometimes presented with a 706R collator.
The 203R section performs saddle stitching for booklets or thin books. Located specifications indicate booklet handling from 3 in x 5 in to 12-1/2 in x 15 in, with stitching thickness up to 3/16 in and operation in the 1,800 to 5,000 cycles per hour range.
The 250R section is a heavy-duty three-knife trimmer for booklet finishing. It can run in line with stitchers, collators, binding equipment and flat-stitching machines, or operate as a hand-fed unit. Sources state trimming up to 11-1/2 in x 15 in and maximum book thickness of 3/8 in.
How sourcing works
- Share the part number, photo, nameplate or operational problem.
- We validate specifications and source options worldwide.
- Our team confirms the quote and coordinates purchasing and logistics.
- We follow up through the final operational outcome.
Reference information
This image represents a featured sourcing example. Confirm the exact part number, model and technical specifications with our team.
The parts shown are products we have previously located, managed or supplied. They do not represent available inventory. Availability, price and lead time are confirmed for each requirement.
Brands, logos and part numbers belong to their respective owners and are shown for technical identification. IndSolUSA (Industry Solutions USA LLC) does not present itself as an authorized distributor unless expressly stated.
Related references
Schneider Electric
View referenceTeSys D contactor, 9 A, 24 V DC coil
LC1D09BD
Manufacturing
Schneider Electric
View referencePhaseo regulated power supply, 24 V, 3 A
ABL8RPS24030
Manufacturing
Schneider Electric
View referenceTeSys GV2 motor circuit breaker, 6–10 A
GV2ME14
Manufacturing
Behind every sourced component
Every component began with an operation that needed to keep producing.
We compare options with you, verify and coordinate each solution until it reaches your operation.
What’s stopping your operation?
Tell us the problem, not just the part number. You can send us a part number, a photo, a nameplate, a datasheet or a description of the problem.